Second Generation Ford Probe

Operating Instructions

Climate Control System

1) Fan Speed Selector

The fan speed can be controlled by turning the knob from LO to HI.

2) Temperature Selector

The air temperature can be adjusted by moving the marker on the Temperature Selector to the red area for warm air, or to the blue area for unheated air. The air will become warmer or cooler depending on how far the control is turned.

3) Function Selector

Selects between the different modes of the Climate Control System. To turn on the Climate Control System, select a function mode using the Function Selector, turn the Temperature Selector (12) to the desired temperature, and set the Fan Speed Selector (1) to the desired speed.

• MAX A/C (If equipped): The air conditioning system is turned on and the interior air is recirculated through the system. This position is more economical than NORM A/C and maximized the air conditioning cooling capabilities.
• NORM A/C (If equipped): The air conditioning system is turned on and cools the interior with the outside air.
• VENT: Ventilates the air with the outside air and directs the air flow through either side Upper Air Vents (Interior) and the Center Console Air Vents (Interior). 
• OFF: All modes are deselects and the Climate Control System is off.
• FLOOR: Directs the flow of air through the floor registers. Little air is also directed at the windshield and side windows to help prevent fogging.
• MIX: Directs the flow of air through the floor registers and at the windshield and side windows.
• Defrost (rightmost position): Directs the flow of air at the windshield and side windows.