First Generation Ford Probe

Operating Instructions

Climate Control System

1) Fan Speed Selector (OFF/MAX)

The Fan Speed Selector controls the speed of the blower fan. Turn the knob clockwise slightly to turn the fan on and start it on low speed. Continue turning to increase the fan speed. To decrease the fan speed, turn the knob counter-clockwise. To turn the unit off again, turn the knob all the way counterclockwise.

2) Panel Vent Selector (PANEL)

Directs the air flow through either side Upper Air Vents (Interior) and the Center Console Air Vents (Interior). When selected, the indicator light will illuminate above the button.

3) High/Low Selector (HI-LO)

Directs the flow of air through the floor vents and through either side Upper Air Vents (Interior), the Center Console Air Vents (Interior), and both left and right Side Window Air Vents (Interior). When selected, the indicator light will illuminate above the button.

4) Floor Vent Selector (FLOOR)

Directs the flow of air through the floor registers and both left and right Side Window Air Vents (Interior). When selected, the indicator light will illuminate above the button.

5) Mix Selector

Directs the flow of air through the floor vents, the windshield vents, and both left and right Side Window Air Vents (Interior). When selected, the indicator light will illuminate above the button.

6) Defrost Vent Selector

Directs the flow of air through the windshield vents, and both left and right Side Window Air Vents (Interior). When selected, the indicator light will illuminate above the button.

7) Fresh Air/Recirculate Selector

Normally, the Climate Control System will circulate the interior air with the outside air. If you would prefer to recirculate the interior air only, press the Fresh Air/Recirculate button. This will maximize the cooling capabilities of the air conditioning system. When on, the indicator light will illuminate above the button. To turn off and circulate the air with the outside air, press the button again.

8) Air Conditioning Selector

Press to engage the air conditioning system. Press again to turn off.

9) Temperature Selector

The air temperature can be adjusted by moving the marker on the Temperature Selector to the right side/red area for warm air, or to the left side/blue area for unheated air. The air will become warmer or cooler depending on how far the selector is moved.