Aftermarket Stereo Installation

Covers:
Step 2: Installing The New Stereo Unit
  1. Mount the new stereo unit as the unit's instructions suggest.
  2. Connect the wiring as shown below:
Main Wiring
Wire Function Color
Main Power (on with ignition) Blue/White
Clock/Memory Power (always on) Blue/Red
Ground * Black/Pink ¹
Illumination (optional) Orange
Power Antenna (optional) Light Green/Yellow
¹ Black/Blue on 1993 Probes
* NOTE: If the new stereo does not have a ground wire,
connect the stereo unit's metal chassis to the vehicle's chassis.

Speaker Wiring (1993 Probes)
Wire Function Receiver
To Amplifier
Left Front (+) Red
Left Front (-) Black
Left Rear (+) White
Left Rear (-) Green
Right Front (+) Yellow
Right Front (-) Blue
Right Rear (+) Brown
Right Rear (-) Black/Yellow

Speaker Wiring (1994-97 Probes)
Wire Function Amplifier To
Speakers
Left Front (+) Blue/Green
Left Front (-) Blue
Left Rear (+) Light Green
Left Rear (-) Green/Orange
Right Front (+) Blue/Black
Right Front (-) Blue/Orange
Right Rear (+) Green/Yellow
Right Rear (-) Green/Blue
  1. Connect the antenna wire to the stereo unit.
  2. If your Probe has the premium sound system option and plan to use the factory amplifier with your new stereo unit, proceed to Step 3 before continuing.
  3. After all connections are completed and the new stereo unit is mounted, reinstall the interior trim.
  4. If your Probe had the premium sound system option and you do not plan to use the factory amplifier with your new stereo unit, you must bypass the amplifier completely. For instructions, proceed to Step 3.

©2000-2005 Performance Probe, Inc. All rights reserved.